HOW TO TEST AT HOME
Have you recently noticed your water bill increasing, despite the fact you haven’t been using more water? Perhaps you’ve experienced a sudden drop in water pressure, or you can’t get consistently good pressure.
These are signs that there could be a leak or burst pipe, potentially a severe one, somewhere in your water system. The timely repair of burst pipes Melbourne wide can restore plumbing integrity and return your water bill to normal.
STORM WATER TEST
EXPLORE THE COMMON ISSUES
Storm water drains can become cracked or broken over time, often as the result of tree root intrusion or pipe damage. A broken storm water drain allows water to escape, flooding the soil around the drain in a heavy downpour.
While not an immediate issue, over time, exposure to this amount of water will moisten the ground and can create ground movement. In some cases, this can cause cracking or structural damage to your home.
Blocked storm water is often caused by a build-up of debris such as sticks, dirt and rubbish. This type of build over time can cause water to back up and overflow from the drain. This can result in similar structural issues and cracking to your property.
If you suspect you have any issues with your storm water, contact our experts today for an inspection and drain clearing.
ROOF LEAK TEST
HOW TO INDENTIFY ROOF LEAKS
Roof leaks are commonly found in many residential properties. They can be a result of storm damage or incorrect installation to name a few.
Whatever the cause, it’s important to identify and rectify any roof leaks before they cause significant internal damage to your home.
If you believe you have a roof leak, we suggest getting one of our experts to safely and thoroughly check over your roof to ensure it’s in good condition.
If you suspect you have any issues with your roof, contact our experts today for an inspection.
BURST PIPE TEST
DETECTING BURST PIPES
Have you recently noticed your water bill increasing, despite the fact you haven’t been using more water? Perhaps you’ve experienced a sudden drop in water pressure, or you can’t get consistently good pressure.
These are signs that there could be a leak or burst pipe, potentially a severe one, somewhere in your water system.
The timely repair of burst pipes Melbourne wide can restore plumbing integrity and return your water bill to normal.
HOW TO CONDUCT A MAINS PRESSURE TEST
If you’re concerned that you may have a possible leak damaging your property, our team of experts are happy to offer you some easy steps to test for water loss in your home. Tests should be conducted for approximately 30-40 minutes to ensure an accurate result.

STEP ONE
Locate your water metre outside; it may be near the property edge towards the street frontage.

STEP TWO
Note the figures that are displayed on your water meter. These will be used as a point of reference.

STEP THREE
Turn the water meter off. Please note that this means you’ll have no water to the property.

STEP FOUR
Wait 30 minutes and check the water meter again. If the figures have changed, it suggests there is a point within the water lines that is continuing to run. This may be as simple as toilet running, but it may be more sinister such as a burst pipe. If you’re concerned about your results, call the team at National Leak Detection to discuss the findings and options moving forward. We’re the leading provider of services for burst pipes Mornington Peninsula & Melbourne have to offer.
SIGNS TO LOOK OUT FOR

Lack of Pressure
Have you noticed a lack of water pressure when using sink taps or taking a shower?

Increasing bills
Is your latest water bill higher than normal, even though you haven’t been using more water?

soft lawn patches
Burst pipes can lead to puddles of water forming and creating damp areas around your yard.
If you suspect you have a burst pipe, contact our experts today for an inspection and suitable solution.